Compact inhalation system
Pure hydrogen that travels with you.
300 ml/min of 99.99% pure hydrogen, the same laboratory-grade purification as CellPowerX's full-size units — in a 3 kg body with a carry case in the box.
Small on the outside
Most compact hydrogen devices save space by dropping the water-treatment stage. AirGo keeps it — a full laboratory-grade system shrunk into something you can pack in a bag, without giving up the part that decides what you actually breathe.
Portable, not compromised
Six things CellPowerX didn't leave out
Water polished first
Feed water is taken to roughly 18 MΩ·cm before electrolysis starts — the same ultra-pure step CellPowerX's larger systems use, kept intact rather than cut to save room.
Packs a case
At 148 × 148 × 208 mm and about 3 kg, AirGo travels in the included carry case — hotel room, office or spare bag, ready wherever you are.
Two sealed chambers
Hydrogen and oxygen are produced in separate compartments with their own outlets, so what you inhale is never mixed together inside the cell.
Your choice of stream
Breathe hydrogen on its own at 300 ml/min, or add 150 ml/min of oxygen through the Y-connector for a natural 2:1 blend.
Lab-grade purity, daily
99.99% hydrogen isn't a launch-day figure here — the purification stage is built to hold it there, session after session.
Short runs or long
Set anywhere from 30 to 360 minutes in half-hour steps and let the compact 500 ml reservoir carry the session.
Where the small ones usually cut corners
Purity survives the shrink
Making a hydrogen device smaller almost always means dropping the water-treatment stage first. AirGo doesn't. Incoming water is stripped of ions, trace metals and contaminants to around 18 MΩ·cm before any current flows — so a compact cell still produces clean, steady hydrogen, not whatever came out of the tap.
Two ways to use it
How you breathe is your call
Primary mode
Pure H₂ Mode
Run 300 ml/min of 99.99% hydrogen through the dedicated outlet — the simple, everyday way to take hydrogen on its own.
Secondary mode
H₂ / O₂ Synergy Mode
Add the included Y-connector to combine 300 ml/min hydrogen with 150 ml/min oxygen in a natural 2:1 ratio for a fuller session.
Technical specifications
| H₂ production | 300 ml/min |
|---|---|
| O₂ production | 150 ml/min |
| H₂ purity | 99.99% |
| H₂ / O₂ ratio | 2:1 natural electrolysis ratio |
| Water conditioning | Ultra-pure — water up to 18 MΩ·cm |
| Inhalation modes | Pure H₂ · H₂/O₂ Synergy |
| Session time | 30–360 min, 30-min steps |
| Operating voltage | 100–240 V ±15%, 50–60 Hz |
|---|---|
| Input power | 95 W |
| Tank volume | 500 ml |
| Dimensions (W×D×H) | 148 × 148 × 208 mm |
| Net weight | 3 kg / 6.6 lb |
| Warranty | 2 years |
What's in the box
- ✓ 1× AirGo device
- ✓ 1× Nasal cannula
- ✓ 2× Y-connector
- ✓ 1× Carry case
- ✓ 1× Power cable
- ✓ 1× User manual
Frequently asked questions
Is AirGo actually portable?
Yes — it's around 3 kg, 148 mm square, and ships with a carry case, so it's built to move between home, work and travel rather than live in one spot.
How does AirGo compare to the AirPlus?
AirGo is the compact model at 300 ml/min with a 500 ml reservoir; the AirPlus is the high-output flagship at 600 ml/min with a 2 L reservoir. Both share the same laboratory-grade purification and dual-chamber design.
What's the output and purity?
300 ml/min of hydrogen at 99.99% purity, plus 150 ml/min of oxygen available when you use synergy mode.
How long can one session last?
Anywhere from 30 to 360 minutes, set in half-hour increments.
Does the smaller size affect purity?
No. The water still passes through the same ultra-purification stage — up to 18 MΩ·cm — before electrolysis, so purity isn't traded away for size.
Take AirGo with you
Ask us about pricing, availability and getting started with your AirGo Hydrogen Respiration System.
Buy Now